tams elektronik RCD-1 Manual page 17

RCD-1
RCD-1
JP1
X1.1
X1.2
X2.1
X2.2
X3.1
X3.2
LED-display of the RCD-1
The LED on the RCD-1 shows, if the device receives signals and which
type they are.
LED Received signals
on DCC-signal received and RailCom-Cutout detected.
out No DCC-signal received. When using a multiple protocol
control unit you have to drive at least one decoder on the
layout in DCC format.
flashes DCC-signal received, but no RailCom-Cutout detected.
The RailCom-Cutout is supplied by the booster and is
indispensible for feeding back data with RailCom. That is
the reason why the booster supplying the respective rail
section has to be RailCom-compatable.
Connection to
Programming connector
Rails / rail 1 (inside, right)
Rails / rail 2 (outside, left)
Booster connection rail 1 (outside, left)
Booster connection rail 2 (inside, right)
Display device connection B
Display device connection A
English
Page 37