Safety Instructions - Antec NDT Series Technical Data Manual

NDT-NFT-NAT ELECTROHYDRAULIC BRAKES
Instructions for assembly, adjustment and maintenance
1. INTRODUCTION.
1.1. WHO IS THE TARGET AUDIENCE?
This manual has been written to aid with the installation, start-up, operation and
maintenance of the brake. It is designed to help workers who are going to manipulate the brake
and service technicians. It should therefore be made available to everyone who is going to
work with these brakes and it must be ensured that the instructions given are followed.
This manual is intended to clarify any constructive doubts and the basic functions of the
brake. We are sure that it will be an extremely useful information and reference tool for
operators and technicians.
NOTE
NOTE

1.2. SAFETY INSTRUCTIONS.

Various symbols appear throughout this manual which highlight the importance of the
section in question. They are usually related to safety, and therefore require special attention.
In the event of any problems or if you have any
questions regarding the brake, please do not hesitate to
contact the ANTEC After-Sales Service, specifying the
brake model and the Antec order number, data that can
be found on the label that each unit has.
Due to ongoing improvements to our brake designs,
your brake may differ slightly from the one described in
this manual. ANTEC reserves the right to make any
changes deemed necessary.
Warning: This symbol will be included at points
or in paragraphs that need special attention. It
usually refers to an operation in which special
care must be taken.
T.D.S.: BC.TDS.00015I
Rev.01: January 2012.
www.antecsa.com Page. 3-48