Antec NDT Series Technical Data Manual page 19

NDT-NFT-NAT ELECTROHYDRAULIC BRAKES
Instructions for assembly, adjustment and maintenance
- Loosen or extract the nuts, bolts and axle shown in the following diagram:
 Loosen the arm base nut and bolt.
 Extract the end steering nut.
 Extract arm base axle.
Extract the end
steering nut.
The purpose of loosening and extracting these parts is to dismantle the arm in order to
facilitate the subsequent sideways assembly of the drum without free ends.
- Insert the brake through a side of the drum.
Loosen the arm base nut
and bolt.
Extract arm
base axle.
T.D.S.: BC.TDS.00015I
Rev.01: January 2012.
www.antecsa.com Page. 19-48