Page 1
Address: 1920 S. Archibald Ave. Suite I, Ontario, CA 91761 Phone: 909.476.0900 Fax: 909.466.0130 Email: sales@leadsun-us.com LEADSUN Australia PTY LTD SOLAR STREET LIGHT Address: 42 Greens Road, Dandenong South, Victoria 3175 Phone: +61 1300 281 005 Fax: +61 3 8610 0393 INSTRUCTION MANUAL Email: jeoffc@leadsun.com.au...
Page 2
Cautions Transportation and storage Please read the below cautions carefully before using the AE series solar street The product contains high capacity lithium-ion battery components, please follow the light to avoid physical injury and product failure caused by improper use. aviation transport law.
Page 3
Part Description Component Brief description Absorb sunlight energy and transform it into electric power, Solar panel control the light by light-operated switch Bird spike Avoid bird droppings blocking the solar panel Manage LED light, communication and control charging and LED and Charging controller discharging.
Page 4
Product Activation Part List Check if all the components are complete before installation, the components and quantity of each set as follows: Daytime: while connect the LED street light to solar engine, it lights 20 seconds and then Off. It means the AE3C has been activated automatically.
Page 5
Before Installation 2.How to place the Gateway ? 1. Installation Direction of Solar Panel Please choose the appropriate model depending on the sunlight intensity of the place and Each Gateway covers a range from 800m to 3000m, depends if there are barriers to block signal required working time.
Page 6
Product Installation 1. Install the X bracket 3. Light pole cantilever wire threading First put the X bracket on the installation frame at the middle of the off-grid solar power supply Set the solar power supply system and street light installation direction according to the system, then clip the 8 screws into the X bracket slot from the installation frame, last, use the street condition and make a mark on the light pole.
Page 7
Product Installation 4. Install the solar power system 6. Wireless system installation (Suitable for wireless type) Connect the solar power system with the extended cables in the light pole and lock the Cautions: connectors in turns. Embed the light pole into the X bracket and use the dedicated tools to fasten 6 M8*16mm and 2 M8*25mm screws.
Page 8
Download the LEADSUN EDGE. might influence the sunlight. A. For APPLE users please go to the APP STORE and install the APP 'LEADSUN Check if the battery pack is damage EDGE' . Replace the damage battery pack.
Need help?
Do you have a question about the ULTRON Series and is the answer not in the manual?
Questions and answers