Philips Azur Freemotion GC4590 Series User Manual page 11

Problem
Flakes and
impurities come
out of the soleplate
during ironing.
Only part of
the light ring is
lighted in safety
auto-off mode.
The base is not
lighted up when
I place the iron
on it.
Possible cause
You have not
performed Calc-Clean
function for some time.
The iron need to be
cleaned.
This is normal. This
is intended to save
energy in safety auto-
off mode.
The iron is not
connected to the base
properly.
ENGLISH
Solution
Use the Calc-Clean
function (see chapter
'Cleaning and
maintenance', section
'Calc-Clean function').
N/A
Take out the iron and
put it back to the base
again.
13