Related Manuals for Gaia Baby Complete Sleep+
Summary of Contents for Gaia Baby Complete Sleep+
- Page 1 Gaia Baby Complete Sleep+/Mini 6AIA baby Assembly Instructions Mini Cot Maxi Cot Toddler bed First bed...
-
Page 2: Attention Notice
Hardware list rnmmnmmm(@ � Ax 14 Bx 14 Cx60 Barrel Nut Barrel Bolt Bolt �\mrm\\\mrrmmmmrmr@) & ======== Bolt Allen Key ,�� � ======r: � � I� Metal Dowel Foot Plastic Screw ATTENTION NOTICE : Please save all un-used parts for future re-assemble. - Page 3 Parts list - Mini Cot assembly WAX1pc X1pc ®x4pcs @X4pcs @X2pcs @X2pcs (J)x 4pcs @X2pcs ATTENTION NOTICE: Parts WA,@ use for Co-Sleeper Adapter conversion ( kit sold separately) Additional parts - Maxi Cot assembly ®x2pcs ®x2pcs @x 2pcs @x 2pcs @X 1pc ®...
- Page 4 Assembly Step 1 Mini Cot Assembly Using bolt CX3pcs, assemble GX1pc with 3 by Allen Key E. Repeat step 1 above until all 4 feet are assembled. You need hardware fil\illi 12pcs � � 4pcs Step 2 Mini Cot Assembly (Newborn Position) Using bolt C X 4pcs, assemble Part 3 to 1 A by Allen Key E;...
- Page 5 Step 3 Mini Cot Assembly Using bolt B X6pcs, assemble 2pcs Part 4 by Phillips Screwdriver. You need hardware I � I 6pcs Step 4 Mini Cot Assembly (Newborn Position) Using Barrel nut A X6pcs , assemble by Phillips Screwdriver. You need hardware 6pcs...
- Page 6 Ste p 5 - Mini Cot Assembly (Newborn Position) Using bolt C X4pcs, assemble by Allen Key E. You need hardware 4pcs Cillilll � Ste p 6 - Mini Cot Assembly (Newborn Position) Usin g Barrel nut A X8pcs , assemble Side pan el by Phillips Screwdriver. Using bolt C X4pcs and bolt D X 8pcs , assemble Side panel by Allen Key E.
- Page 7 Ste p 7 - Mini Cot Assembly (Newborn Position) Height selection - Upper Position/Newborn Using bolt C X12pcs, assemble parts 2x2 pcs + 7x4 pcs in upper position. You need hardware 11111111111111111111 (@ 12pcs Note : LOWER POSITION If your baby is able to kneel/ stand please use the lower position.
- Page 8 Step 9 - Mini Cot Assembly (Newborn Position) Safety notice : Height selection new born or lower position. Using the Mattress put down into the First Cot. lower position lower position Use with Gaia Serena Maxi Cot Mattress (sold separately) * Recommended Mattress Size: MINI COT: 925mm long x 650mm wide x 100mm depth.
- Page 9 Ste p 10 - Maxi Cot Assembly Using bolt C X4pcs, assemble by Allen Key E. You need hardware 4pcs !\llllllllllllmm (@ � Ste p 11 - Maxi Cot Assembly Using Barrel nut A X8pcs , assemble by Phillips Screwdriver. Using bolt C X4pcs , assemble by Allen Key E.
- Page 10 Ste p 12 - Maxi Cot Assembly Insert Metal Dowel X6pcs into the holes of the side panels by hand & hammer. You need hardware 6pcs Ste p 13 - Maxi Cot Assembly/ Newborn Using bolt CX4pcs , assemble 2pcs Part 12 to 2pcs Part 11 by Allen Key E. You need hardware 4pcs !\llllllllllllmm (@...
- Page 11 Ste p 14 - Maxi Cot Assembly / Newborn 14(i) Attach 1pc Part 11 to cot ensuring metal dowels are in place. 14(ii) Using bolt D X4pcs, assemble by Allen Key. Do not tighten. (B olts sho u ld be f u lly tightened after both side panels are fitted ) 14(iii) Using bolt C X8pcs, assemble 1pc Part 2 and 2pcs Part 7 You need hardware 4pcs...
- Page 12 Ste p 15 - Maxi Cot Assembly/ Newborn From outside cot, repeat steps 14i-iii for part 11b Securely fasten all 8X bolt D You need hardware 6pcs !1111111111111111111(@ 4pcs Note : If your baby is able to kneel/stand please use the lower position (see Step 17). Ste p 16 - Maxi Cot Assembly/ Newborn Safety notice: Using Bolt C X12pcs, assemble by Allen Key E.
- Page 13 Step 17 - Maxi Cot Assembly/ Newborn & 6mths+ On completion, please place mattress into the cot*. At 6mths+, remove parts 2x2,7x2 &12x2. Repeat Step 11 and 12 in Lower Position. Note : If your baby is able to kneel/stand please use the lower position.
- Page 14 Assembly First Bed Conversion To allow conversion to First-bed. Using Allen Key E unscrew the bolt of the side panel and using the Philips Screwdriver unscrew the Barrel nut of headboard. You need hardware E===!!I� 6pcs llmm6 Put the mattress into the First -bed. Using the Plastic Screw H into the holes of the headboard panel.
- Page 15 Position First bed- When the baby has developed further, you may convert the cot to create a 'first-bed' suitable up until the age of 5 years. This can be extended further with the use of the 'Gaia Baby Junior Bed Extension Kit' (sold separately) Safety notice •...
- Page 16 The warranty applies to the territory in which the product was purchased. During the warranty period, Gaia Baby will repair or replace any defective part. In the event of a product being replaced in entirety, the guarantee on the replacement will expire two years from the original purchase date.