Advertisement
VI. Troubleshooting
During operations, if any errors occurred, please check the following table before calling
for service. Below are common errors and the checks to perform.
Problem
After connecting the power &
pressing the "power" key, the
appliance has no response.
Heating being interrupted in
normal use and a "Beep"
will be heard.
No operation during
the heating being in use.
Check Points
Is the fuse blown out?
Is the unit properly
connceted to the outlet?
Incompatible cookware or no
cookware is used?
Is the cookware not
placed in the center of
the heating zone?
Is the cookware being heated,
but continually being removed?
Is the air intake/exhaust
vent clogged or dirt
has accumulated?
Potential Solution
Check the fuse using a volt meter
Check to insure the plug is
connected firmly to the unit and
the outlet is reciving power.
Replace compatible cookware
for the induction cooker.
Place the cookware at the center
of the defined heating zone.
Do not remove cookware
while in use.
Clean the vent area and please
keep a minimum distance of 2 to 4
inches from the unit to the walls
or other barriers.
Advertisement
