Page 1
Wireless Calling Receiver User manual Wireless calling system...
Page 2
Summany Thanks for choosing this wireless calling system. The receiver host adopts RF wireless and learning code technology. It can easily pair up to 999 channels of wireless calling transmitters and 1 manager remote controller. The receiver host uses advanced industrial micro processor and high-sensitivity superheterodyne receiving technology which make the products very stable.
Page 3
Button Function & Installation to the wall Long press for 2sec to enter settings menu; short press to submenu. Short press to turn up the number; Long press to turn up the number quickly; Browse the calling record. Short press to turn down the number; DOWN Long press to turn down the number quickly;...
Page 4
Fast Settings Diagram First class Second class Value Instruction Settings menu Settings menu General mode (1~999 channels) Pairing Area mode (A-F areas) Manager Pair manager remote controller controller pairing Manager Delete manager remote controller controller delete Delete Delete call buttons No.
Page 5
Operation 1. Self test when power on When the receiver host is power on, it starts initialization program. The display shows the digits from 000 to 999 along with the prompt sound”Initialization... please wait”. 2. Function settings At first use, please do the settings like below. After all the settings are finished, please power off the host and reset.
Page 6
(5) --5: Prompt voice Press [SET] button to enter "--5" submenu. The display will show "001", then press [UP/DOWN] to select sound prompt mode. 001: No. xx call 002: Floor xx call 003: No. xx come in 004: No. xx treatment 005: No.
Page 7
Optional for transmitter 1-button mode: YK500-1E/F, YK1000-1C, YK200-1C, TSYK200-1, YK500-1H 2-button mode: YK1000-2C, TSYK500-2X, YK500-2H, TSYK1000-2X 3-button mode: YK500-3H 4-button mode: YK500-4X, YK500-4H, TSYK1000-4B, TSYK1000-4X, TSYK2000-4X 6-button mode: TSYK500-6 Others mode: TSYK-JP999 Problems Reasons Solutions While power on, the receiver host The power adaptor is broken.
Need help?
Do you have a question about the ZJ-39 and is the answer not in the manual?
Questions and answers