Janome Memory Craft 9850 Instruction Book page 10

q
q
t
e
z
c
w
e
t
r
z
v
r
w
u
y
Connecting the Power Supply
z First make sure the power switch q
x Insert the machine plug w of the power supply cable
into the machine socket e
c Insert the power supply plug r into the wall outlet t,
and turn the power switch q
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Wall outlet
NOTES:
Make sure to use the power supply cable that came
If you turn off the power switch, wait for 5 seconds
WARNING:
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts such
Always turn off the power switch and unplug the
machine from the power supply:
If you wish to use the foot control, insert the pin connector
z First make sure the power switch q
x Insert the machine plug w of the power supply cable
into the machine socket e
c Insert the pin connector r
v Insert the power supply plug y into the wall outlet u,
and turn the power switch q
q Power switch
w Machine plug
e Machine socket
r Pin connector
t Jack
y Power supply plug
u Wall outlet
NOTE:
The start/stop button does not work when the foot
Operating Instructions:
The symbol "O" on the switch indicates the "off" position
For the U.S.A. and Canada only
Polarized plug (one blade wider than the other):
To reduce the risk of electric shock, this plug is intended
6
t on the