Instructions - UTILIS Typhon UTY CP 20-45-00 User Manual

INSTRUCTIONS

1. Remove typhon ® from box.
2. Remove the plastic protector from the lower fitting
(shown in figures 1a and 1b for models UTY CP 20-45-01 and UTY CP 30-45-01).
Figure 1a
3. Screw airline directly into the typhon
– Monthly oiling of contained air motor is required. See "Maintenance" section.
– If a quick connect is needed, we suggest using a high-flow quick-disconnect adaptor for easy disconnection
during maintenance.
4. Connecting the on-site compressed air supply to the adapter (see figure 2b).
– Air supply should be capable of 6.2 bar and be filtered.
®
– typhon can be installed down the line from an oiler.
Note: Included in the delivery with the UTY CP 20-45-01 and UTY CP 30-45-01 models is a high-through-
put quick connector. The air supply is connected in the same manner as described above.
Figure 2a
Figure 1b
® -Zoll-FNPT) as (see figure 2a).
fitting ( ⁄
1
4
Figure 2b
36