Introduction - UTILIS Typhon UTY CP 20-45-00 User Manual

INTRODUCTION

Description
typhon ® is designed to clean parts and capture residue
with one easy touch, keeping the work area and sur-
rounding air clean.
The air nozzle is used to blow residue down into the
inlet tube, while simultaneously creating suction. This
will pull chips and lubricant into the container below.
The captured residue can be recycled ... saving money
on expensive lubricants and help to reclaim more chips
instead of covering the floor.
Needed
®
A typhon unit comes with a
connecting to an existing shop air line. A high-flow
quick-connect adaptor can be attached for ease of use,
however, to ensure a sufficient air supply we recom-
mend connecting into the main air supply without any
restrictions, such as a quick connect.
⁄ -Zoll-FNPT fitting for
1
4
34
We recommend using an air hose which can keep a
minimum pressure of 6.2 bar air pressure and has a
diameter of at least 10 mm to supply the typhon
the main line. Smaller diameter, rolled-up spiral hoses
or excessively long lines may influence the air supply.
Safety Instructions
Please read user guide carefully before in-
stalling.
Disconnect the air supply if the unit is taken
apart for recycling of coolant, retrieval of
parts, or any other maintenance.
NOT FOR USE WITH
HIGHLY FLAMMABLE LIQUIDS
® via