AIR SUPPLY
In order to optimize the performance of the typhon
consider the following:
The air hose to the typhon
as practical.
– Too low pressure on the air nozzle can result if an air
hose is used which has too small diameter or is too
long from the central air supply.
– We therefore do not advise using rolled-up air
hoses between the central air supply and the typhon
device.
For example, CEJN quick connectors
®
®
should be as short
®
© CEJN
35
If the air pressure is too low the result can be
that the quick connector components are too
strongly limited.
– When using conventional quick connectors available
from trade in conjunction with the typhon
the flow pressure at the nozzle of the typhon
can fall by 30%.
– Therefore, if quick connectors are required, high-
throughput quick connectors should be used.
Straight hose supplies the typhon
®
device,
®
device
®
with compressed air.