Beko DP 109 Instructions For Installation And Operation Manual page 5

Further safety instructions:
• During installation and operation, the national regulations and safety instructions in force also need to
be observed.
• The DP 109 must not be employed in hazardous areas.
Additional instructions:
• Do not overheat the device!
• Use the spanner flat (SW27) when screwing in.
• The DP 109 must not be disassembled.
Caution!
Malfunction of the DP 109
Incorrect installation and insufficient maintenance can lead to malfunctions with the DP
109 and result in inaccurate measuring results and misinterpretations.
r
Measures:
Prior to the measurement, allow compressed air to flow off at the tapping point to remove condensate and
dirt deposits. This reduces contamination of the DP 109 and of the measuring chamber.
Stagnant air leads to long setting times.
DP 109
Safety instructions
5