Connecting External Analog Inputs - SCT X4 User Manual

SECTION 4: USING DEVICE FEATURES
EDITING GAUGE LAYOUT
If you need to monitor more than two gauges at a time then you will need to change your
layout. You may only monitor a maximum of 8 parameters at a time.
1. From the Main Gauge display, press the left or right arrow button once.
2. Scroll down to highlight "Select Gauge Layout" and select it.
3. Highlight the layout you want to view and press the center button.
4. To edit the new layout use the instruction under "Editing a Gauge" above.

4.2 CONNECTING EXTERNAL ANALOG INPUTS

Using the wiring specifications that came with your analog sensor, connect to the
proper pins using the diagram below.
NOTE: Do not connect any device to the analog input that exceeds 5 volts to the analog port or
permanent damage to the adapter can occur.
X4
16