Clearance Between Rear Needle Guard And Needle - Pfaff 3806-12/22 Adjustment Manual

Adjustment
13

Clearance between rear needle guard and needle

.05.17
 Turn the balance wheel until the looper point is located at the right side of the needle.
 Adjust bracket 1 (screw 2) according to the requirement.
24
Requirement
When the point of the looper, which is advancing from the right, reaches the right side of
the needle, the needle guard 3 must still be in slight contact with the needle.
2
Fig. 13 - 18
Under no circumstances should the needle be defl ected by the needle guard 3!
1
3