Final Adjustment Of The Needle Height - Pfaff 3806-12/22 Adjustment Manual

Adjustment
13

Final adjustment of the needle height

.05.15
 Turn the balance wheel until the looper point, which is coming from the right, reaches
 Without turning the needle bar 1 (screw 2) adjust it according to the requirement.
22
Requirement
When the point of the looper advancing from the right reaches the left side of the needle,
the top edge of the needle eye must be 1.0 - 1.2 mm below the bottom edge of the looper.
Fig. 13 - 16
the left side of the needle.
3
4
1
2
1