26
4- ANVÄNDNING - UTILITY
4.1 - KONTROLLERA
TJOCKLEKEN PÅ
PRODUKTEN
Maskinen blir inställd i fabriken
på en medel tjocklek; för att ändra
tjockleken, följ instruktionerna
nedan:
•
lossa stopp ratten för kalibratorn
(1)
1
•
skruva kalibratorn för att ställa
in tjockleken (2)
•
blockera på nytt stopp ratten
genom att skruva tillbaka den (1)
2
4.1 - CONTROL THE THICKNESS
OF THE PRODUCTS
The machine is regulated in the
factory with a medium thickness; to
obtain another thickness, follow the
instructions indicated below:
•
Loosen the stop knob of the
camb device (I)
•
Turn the camb device, to
regulate the thickness(2)
•
Lock the stop knob (1)
Färsbifformande maskin- Patty forming Machine