Färsbifformande maskin - Patty forming Machine
3- INSTALLATION - INSTALLATION
3.1 - UPPACKNING
•
Vid mottagande av maskinen,
kontrollera att emballaget är
intakt och utan skada
•
Emballaget är av naturligt avfall
3.2 - TRANSPORT OCH
POSITION AV MASKIN
•
Installera anordningen på
lämplig arbets yta på en höjd
av cirka 800 mm från golvnivån.
Maskinen är utrustad med
3 gummi stöd. Om dessa
instruktioner följs, blir oljud och
vibration reducerade.
•
Det är nödvändigt att
anordningen blir installerad
i ett område som underlättar
underhållningen av maskinen.
Maskinen kan placeras I en
normal arbets miljö, det är klokt
att placera maskinen i en torr
och välventilerad position med
distans från hetta.
•
För att flytta maskinen tag
ALDRIG tag i rengörings
skrapan.
•
Innan du flyttar maskinen, tag
bort rengörings skrapan. (se
5.2.5)
•
För att flytta maskinen ta tag i
den som indikerat i figuren till
vänster..
•
För att förflytta maskinen
3.1 - UNPACKING
•
Upon receipt of the machine,
check the packaging for whether
the erector to steak suffered no
damages
•
The packaging components
products are assimilated solid
urban waste.
3.2 - TRANSPORT AND
POSITIONING OF THE
MACHINE
•
It is advisable to install erector
to steak on a map stable work
and a height of about 800 mm
from the ground. The machine
is equipped with 3 rubber
supports. Whether the above
installation instructions are
respected, noise and vibration
will be reduced
•
The installation area must and
permit the use maintenance
of the erector to steak and it
advisable to position in a dry,
well ventilated and away from
souces heat. It can be used in a
normal workplace
•
To move the machine NEVER
get hold the cleaner arm.
•
Before moving the machine to
remove the cleaner arm
(see 5.2.5)
•
To move the machine to get hold
in the positions indicated
in the figure.
•
To operate in complete safety
are necessary nr. 3 people.
21