Setting A Syslog Host - Watchguard SOHO User Manual

Setting a Syslog Host

Setting a Syslog Host
The SOHO can also be configured to transmit log entries to a
Syslog host.
Follow these steps to setup a Syslog Host:
1 With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1.
2 From the navigation bar on the left side, select Logging =>
Syslog Logging.
The Syslog Logging page appears.
3 Enable the checkbox labeled Enable syslog output.
80