Watchguard SOHO User Manual page 29

Determine your current TCP/IP settings
For your reference, record the computer's current TCP/IP settings
in the chart provided at the end of this section. Different operating
systems will supply different information. To locate your settings:
Microsoft Windows NT or 2000
1 Click
Start
2 At the C:\ prompt, enter
3 Enter your current TCP/IP settings in the chart provided
below.
4 Click
Cancel
Microsoft Windows 95 or 98 or ME
1 Click =>
Start
2 Type:
winipcfg
3 Select the "Ethernet Adapter."
Enter your current TCP/IP settings in the chart provided below.
4 Click
Cancel.
Macintosh
1 Click
Apple menu
2 Enter your current TCP/IP settings in the chart provided
below.
3 Close the window.
Other operating systems (Unix, Linux)
1 Consult your operating system guide to locate the TCP/IP
screen.
2 Enter settings in the chart provided below.
User Guide 5.0
=> =>
Programs Command Prompt.
.
Run.
. Click
OK
=>
Control Panels
ipconfig/all
.
=>
TCP/IP
The Installation Process
.
. Press
Enter
.
29