Watchguard SOHO SOHO and SOHO | tc User Manual page 36

Watchguard soho user guide soho and soho|tc 2.3
Table of Contents

Advertisement

Default factory settings
• Public network settings use DHCP
DHCP must be enabled for you to be able to access the SOHO device when
it boots up.
Private Network
• Private network IP address: 192.168.111.1.
• All computers on the private network automatically receive
their addresses using dynamic DHCP.
• Ten seat license–Ten computers have access to the Internet
through the SOHO. Remember, while only four devices
connect directly to the LAN ports (numbered 1-4), one or
more of these devices can be a hub or router. Please see,
"Cabling the SOHO for more than four computers" on
page 8
24
N
OTE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOHO WatchGuard SOHO and SOHO | tc and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Soho 2.3Sohotc 2.3

Table of Contents