Watchguard V10.0 Administration Manual page 22

Mobile vpn with ipsec

Hide thumbs Also See for V10.0:

Re-creating End-User Profiles

Under MUVPN Group, Policy Manager displays the authentication server, in parentheses, for the

Mobile VPN group.

Using the Any Policy

The Any policy is added to all Mobile VPN user groups by default. The Any policy allows traffic on all

ports and protocols between the Mobile VPN user and the Remote Networks available through the

Mobile VPN tunnel. If you want to restrict traffic for Mobile VPN users to a more limited group or ports

and protocols, the Any policy on the Mobile User VPN can be deleted and replaced with policies speci-

fied by the administrator.

Re-creating End-User Profiles

The WatchGuard® Mobile VPN with IPSec configuration gives you the ability to re-create end-user pro-

files for your existing Mobile VPN users. Use this procedure to create new end-user profiles with the

same settings for the current MUVPN users.

Mobile VPN configuration files, or profiles, are located in Documents and Settings\All Users\

Shared Watchguard\muvpn\ip_address\config_name\wgx\config_name.wgx. If the tunnel is authenti-

cated with certificates, the certificates are also created.

To create new end-user profiles for current Mobile VPN users, on the Mobile User VPN tab, select the

Mobile VPN group and click Generate.

You can now distribute these end-user profiles as necessary.

Saving the Profile to a Firebox

To activate a new Mobile VPN user profile, you must save the configuration file to the Firebox®. From

the File menu, select Save > To Firebox.

Mobile User VPN

Table of Contents