Watchguard V10.0 Administration Manual page 11

Use the instructions provided here to go through each screen of the wizard. Click Next after each
3
step.
Select a user authentication server
4
Select an authentication server from the Authentication Server drop-down list. You can
authenticate users with the internal Firebox database (Firebox-DB) or with a RADIUS, SecurID,
LDAP, or Active Directory server. Make sure that this method of authentication is enabled in
Policy Manager (select Setup > Authentication > Authentication Servers).
Type a group name in the Group Name field. You can type the name of an existing Mobile VPN
group, or enter a group name for a new Mobile VPN group. Make sure the name is unique among
VPN group names as well as all interface and tunnel names.
See the Authentication chapter in the WatchGuard
information.
Select a tunnel authentication method: Select Use this passphrase. Type and confirm a
5
passphrase.
When your remote users import their Mobile VPN connection profile, they will need this
passphrase. In the Mobile VPN Configuration Assistant, this passphrase is known as the "pre-
shared key" or "shared secret. "
Administrator Guide
Configuring the Firebox for Mobile VPN
®
System Manager User Guide for more
9