Sharp Auvi MD-DR77 Operation Manual page 121

CHANGING DEFAULT SETTINGS
[On the main unit]
1. Insert a MiniDisc.
2. In the stop mode, press the MENU button.
3. Select "SET UP" by pressing the
press the MENU button.
4. Select a menu by pressing the
the MENU button.
5. Select an item by pressing the
the MENU button.
Menu
BEEP
Key-touch tone
AUTO PLAY
Auto play
POWER SAVE
Auto power save
DIGI LEVEL
Digital recording level Setting retained
REMOTE LCD NORMAL
Backlight on the
remote control
NORMAL Display: Always displayed.
Backlight: Lit for approx. 10 seconds after operation.
ALL TIME Display: Always displayed.
Backlight: Lit for approx. 10 seconds after operation.
(Always lit when operated with AC power.)
AUTO OFF Display: Displayed for approx. 10 seconds
after operation.
Backlight: Lit for approx. 10 seconds after operation.
(pages 70 - 71)
or button and
or button and press
or button and press
Item
ON OFF
Beep on Beep off
ON OFF
Set Canceled
AUTO OFF
Set Canceled
AUTO SAVE NOT SAVE
Canceled
ALL TIME AUTO OFF
See below.
1-BIT PORTABLE MINIDISC RECORDER MD-DR77
(pages 72 - 83)
EDITING MINIDISCS
Editing is possible only on the main unit.
Titling a recorded MiniDisc
Creating a disc name
1. Insert a recorded MiniDisc and cancel the group mode.
2. Press the button to display "
3. Press the MENU button.
4. Select "NAME" by pressing the
press the MENU button.
5. When "DISC NAME" appears, press the MENU button.
You can enter characters now.
6. Press the DISP button to select the type of characters.
Katakana Alphabet (capital letters)
ters) Numbers and symbols
7. Select a character by pressing the
press the MENU button.
Repeat the operation to enter more characters.
8. After entering all characters, hold down the MENU button for
2 seconds or more. The disc name is stored.
Creating a group name
1. Insert a group-recorded MiniDisc.
2. In the stop mode, press the GROUP button.
"GR" will flash.
3. Within 5 seconds, select the group to be named by pressing
the or button.
4. Press the MENU button.
5. Select "NAME" by pressing the
press the MENU button.
6. When "GROUP NAME" appears, press the MENU button.
You can enter characters now.
(pages 72 - 75)
".
or button and
Alphabet (small let-
or button and
or button and
121