Sharp Auvi MD-DR77 Operation Manual page 113

(pages 15 – 21)
POWER SOURCE
Rechargeable battery
1. Insert the rechargeable battery.
(1) Open the battery compartment cover.
(2) Insert the – mark of the battery first.
(3) Close the battery compartment cover.
2. Plug the AC adaptor into an AC outlet (AC 100V) and plug
the other end into the DC IN 5V jack on the battery charger.
3. Place the main unit on the battery charger with its front toward you.
When placing the main unit on the battery charger,
the charging state is displayed on the LCD.
Display
Scrolling.
Battery charging will be completed in 3.5 hours. When com-
pleted, " " will go out. (The battery is charged up to 90% if
it is completely discharged.)
You can also charge the battery by connecting the AC adaptor
directly to the DC IN 5V jack on the main unit and pressing the
CHARGE button.
The battery will not be charged while the main unit is powered on.
The battery will not be charged when the alarm is set.
Use only the supplied rechargeable battery (AD-N55BT).
AC adaptor
(page 19)
It is recommended to use the AC adaptor when recording.
Plug the AC adaptor into an AC outlet (AC 100V) and plug the
other end into the DC IN 5V jack on the main unit.
Caution:
To ensure safety, unplug the AC adaptor from the AC outlet if not
using it for long periods.
(pages 15 - 16)
Conditions
Charging.
1-BIT PORTABLE MINIDISC RECORDER MD-DR77
Alkaline battery power
1. Open the battery case supplied with the unit.
2. Insert the AA size battery (LR6) into the battery case accord-
ing to the polarity and then close the case.
3. Align the protuberance on the battery case with the indenta-
tion on the side of the unit.
4. Turn the knob on the battery case toward "LOCK", and then
make sure that the battery case does not move.
When using this portable MD with an alkaline battery, keep
the rechargeable battery in the main unit.
Do not insert a rechargeable battery (such as nickel-cad-
mium rechargeable battery) into the battery case.
Checking the remaining amount of battery
While the unit is being operated with the rechargeable battery or
alkaline battery, the remaining amount of battery will appear on
the display.
Charging
completed
(page 22)
HOLD FUNCTION
The current operation remains even if buttons are accidentally
pressed on a crowded train, etc.
Main unit
To activate or cancel the hold function, hold down the HOLD
button for 4 seconds or more.
Remote control
To activate the hold function, slide the HOLD switch toward
To cancel, slide back the HOLD switch.
(page 20)
(page 21)
Flashing
Charging
required
.
113