Related Manuals for CH Hanson Norse 9680202
Summary of Contents for CH Hanson Norse 9680202
- Page 1 9680202_oipm_En011_9640915.01 03/21/18 Page 1 Operating Instructions & Parts Manual Model 9680202 8˝ Drill Press 9640915.01 0318...
- Page 2 9680202_oipm_En011_9640915.01 03/21/18 Page 2 NORSE Operating Manual & Parts List 9680202 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! retain instructions for future reference.
-
Page 3: Getting Started
9680202_oipm_En011_9640915.01 03/21/18 Page 3 NORSE Operating Manual & Parts List 9680202 GETTING STARTED Unpack Open carton and carefully remove the top Styrofoam section, Save This Manual containing the base, table assembly, chuck box, and hardware bag. You will need the manual for the safety warnings and pre cautions, Then remove the head assembly and column from the lower assembly instructions, operating and maintenance procedures, Styrofoam section. -
Page 4: Specifications
9680202_oipm_En011_9640915.01 03/21/18 Page 4 NORSE Operating Manual & Parts List 9680202 SAFETY RULES CONTINUED • Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work Prepare Work Area for Job surface before plugging it in. •... -
Page 5: Installation
9680202_oipm_En011_9640915.01 03/21/18 Page 5 NORSE Operating Manual & Parts List 9680202 ASSEMBLY INSTALLATION Tools Needed for Entire Assembly All electrical connections must be • Adjustable wrench performed by a qualified electrician. Power Source • Hammer with block of wood or rubber hammer The motor is designed for operation on the voltage and frequency •... -
Page 6: Operation
9680202_oipm_En011_9640915.01 03/21/18 Page 6 NORSE Operating Manual & Parts List 9680202 OPERATION 2. To tilt the work table, loosen the table bolt/nut on the underside of the table and tilt to desired angle up to 45° and retighten. Starting and Stopping the Drill 3. -
Page 7: Troubleshooting Guide
9680202_oipm_En011_9640915.01 03/21/18 Page 7 NORSE Operating Manual & Parts List 9680202 TROUBLESHOOTING GUIDE Symptom Possible Cause(s) Corrective Action Noisy operation 1. Incorrect belt tension 1. Adjust tension 2. Dry spindle 2. Lubricate spindle (see Maintenance, page 6) 3. Loose spindle 3. - Page 8 9680202_oipm_En011_9640915.01 03/21/18 Page 8 NORSE Operating Manual & Parts List 9680202 REPAIR PARTS ILLUSTRATION FOR 9680202 8˝ DRILL PRESS Replacement Parts Illustration for 8˝ Drill Press...
- Page 9 9680202_oipm_En011_9640915.01 03/21/18 Page 9 NORSE Operating Manual & Parts List 9680202 REPAIR PARTS LIST FOR 9680202 8˝ DRILL PRESS Ref. Part Ref. Part Description Number: Qty. Description Number: Qty. Hex screw 8 x 8mm Hex nut 10mm Spindle pulley 9639232.01 1 Pointer 9639250.01 1 Upper spindle assy.
- Page 10 9680202_oipm_En011_9640915.01 03/21/18 Page 10 NORSE Operating Manual & Parts List 9680202 NOTES...
- Page 11 9680202_oipm_En011_9640915.01 03/21/18 Page 11 NORSE Operating Manual & Parts List 9680202 NOTES...
- Page 12 9680202_oipm_En011_9640915.01 03/21/18 Page 12 NORSE Operating Manual & Parts List 9680202 NORSE Warranty NORSE by C.H. Hanson warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground or otherwise altered, or used for a purpose other than that for which it was intended.