Installation On A Standard Rail - Siemens SIMATIC NET SCALANCE X005 Commissioning Manual

Figure 5-2

5.3 Installation on a Standard Rail

Installation on a SIMATIC S7-300 Standard Rail
1. Place the upper guide at the top of the SCALANCE housing in the S7 standard rail.
2. Screw the SCALANCE X005 device to the lower part of the standard rail.
3. Install the electrical connecting cables.
Uninstalling
1. First remove all connected cables.
2. Unscrew the screw fittings at the lower part of the standard rails and subsequently pull
Industrial Ethernet SCALANCE X005
Commissioning Manual, A2B00051528A
SCALANCE X005 removing from a DIN rail (35 mm)
the device away from the standard rail.
Installation and Maintenance
5.3 Installation on a Standard Rail
5-3