Troubleshooting - Hamilton Beach 86650 Use & Care Manual

Troubleshooting

The Pasta Maker may display an error message from time to time. Use the table below to quickly resolve the issue.
Error Code Situation
E02 Mixing bowl Lid is not in place.
E14 Too much flour in the Mixing Bowl.
E16 No liquid in the Mixing Bowl.
E04, E05, E09, E15, E17 Call Customer Service at 1.800.851.8900.
none Dough is too wet.
none Dough is too dry.
If the Pasta Maker stops working:
• Unplug.
• Wait 5 seconds, and then plug back into outlet.
• Use Manual Mode to finish kneading or extruding pasta.
840303500 EN v06.indd 11
Solution
Make sure Lid is snapped onto Mixing Bowl.
Remove some flour from Mixing Bowl.
Add correct amount of liquid.
1. Press START/STOP button and unplug.
2. Remove Lid and break up any clumps or balls of dough with your hands.
3. Add 2 tablespoons (30 ml) of flour to dough, then replace Lid and plug back in.
4. Press KNEAD DOUGH, then START/STOP button.
5. Repeat as necessary for desired consistency.
Add 5–10 ml liquid and continue to mix. Press KNEAD DOUGH button, if necessary.
11
6/29/18 5:31 PM