Care And Cleaning - Hamilton Beach 86650 Use & Care Manual

Care and Cleaning

1. Unplug. Remove Collar by
turning counterclockwise, then
remove Shaping Disc.
5. Use the cleaning tool to poke out
any remaining pieces of dough
from the Shaping Disc.
10
840303500 EN v06.indd 10
2. Open Lid and remove.
TIP: For easier cleaning, allow the
dough to dry before using the
cleaning tool. If dough will not come
out easily, place disc in the freezer
for 30–60 minutes, then try again.
w WARNING Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord,
plug, or base in any liquid.
3. Remove Extruder by pushing it
out of the barrel with your thumb,
then pulling it out the rest of the
way from the front of the bowl.
6. Wash the removable parts in
hot, soapy water. Rinse and
dry thoroughly before storing,
or wash in the top rack of the
dishwasher. Wipe base with a
soft damp cloth, then dry.
4. SLide Mixing Bowl away from
base, then remove Mixing
Paddle.
7. Store the Shaping Discs in the
Storage Drawer located at the
bottom of the base.
6/29/18 5:31 PM