Advertisement
FRONT PANEL CONTROLS
INPUT
socket to plug in a bass guitar.
GAIN
control + CLIP LED to adjust the input level.
GRAPHIC EQ
8 band EQ to cut / boost the respective frequencies by +/- 12 dB.
LOW BOOST
switch + LED to boost deep frequencies.
HIGH BOOST
switch + LED to boost high frequencies.
EFF. LOOP
for the insertion of effect units. Connect EFF. SEND with the input and EFF. RETURN with the output of the
effect device.
LINE OUT
socket allows connecting additional power amplifiers, active cabinets or a mixing console.
MASTER
control determines the main level.
MUTE
switch + ON / MUTE LED mutes the signal of all outputs except the PHONES socket. To avoid switching noise
use the MUTE switch only when no audio signal is beeing played back.
PHONES
socket for connecting headphones (min 200 Ohm).
REAR PANEL
MAINS IN AC
terminal with integrated fuse compartment for connecting the amplifier to mains.
POWER
switch for turning the amplifier on and off.
SPEAKER OUT
to connect the amplifier to the speaker.
HORN OFF
switch to turn the horn off.
The rear stand allows for a 45-degree tilt of the amplifier.
10
Advertisement
