Front Panel Controls; Rear Panel - Warwick Take 12 User Manual

FRONT PANEL CONTROLS

INPUT socket to plug in a bass guitar.
GAIN control + CLIP LED to adjust the input level.
BASS control to boost/cut deep frequencies.
MID LOW control to boost/cut low mids
MID HIGH control to boost/cut high mids
TREBLE control to boost/cut high frequencies.
EFF. LOOP for the insertion of effects units. Connect SEND with the input and RETURN with the output of the
effects device.
LINE OUT socket allows to connect additional power amplifiers or active cabinets.
MASTER control determines the mains level.
MUTE switch + ON/MUTE LED cuts the signal from all outputs, except from the PHONES socket
PHONES socket for connecting a headphone (min 200 Ω).

REAR PANEL

MAINS IN AC Terminal with integrated fuse compartment for connecting the amplifier to the current network.
POWER switch for turning the amplifier on and off.
SPEAKER OUT socket for connecting the loudspeaker.
HORN OFF switch to switch off the hf horn.
5