Panasonic JT-C52 Series Operating Instructions - Reference Manual page 16

Getting started
2.
Move the printer cover to the bottom of the printer (A), and pull in the direction of the arrow in the figure
(B) to align the printer cover shafts and the bearings.
•
If the printer cover shafts and the bearings are not aligned, the printer cover will come off. Make sure
to move the printer cover to the bottom of the printer.
3.
Raise (A) and close (B) the printer cover to insert the printer cover shafts into the bearings.
4.
Press the printer cover in the direction of the arrow until you hear a click.
IMPORTANT
•
Do not forcefully press on the bearings because the shafts may break.
If the roll paper jams
1.
Open the printer cover (page 13).
2.
Remove the roll paper and cut off the wrinkled or dirty part.
3.
Set the roll paper (page 13).
•
If the roll paper is deformed such as being smashed, make it round again.
16 Operating Instructions - Reference Manual