5.
Attach the battery cover.
•
Insert the tab of the battery into the groove of the unit (A), press the A locations, and then press
the B locations (B).
•
Press the outer periphery of the battery cover and check that nothing is raised between the battery
cover and unit.
•
Take care so that the battery pack remover sheet does not get caught.
IMPORTANT
•
The unit cannot operate with the AC adapter alone. Make sure you insert a charged battery pack.
•
If you remove the battery pack, the date and time settings return to default, or return to the
automatically or manually set previous date and time. If the unit is not connected to a wireless LAN
or mobile network, configure the settings again (page 22).
B
A
Operating Instructions - Reference Manual
Getting started
11