Panasonic JT-C52 Series Operating Instructions - Reference Manual page 14

Mobile
Table of Contents

Advertisement

Getting started
Make sure you firmly close the printer cover. If you start printing without firmly closing the cover, the
paper will jam or printing will not work correctly.
6.
Cut the roll paper output from the roll paper outlet (page 14).
IMPORTANT
Make sure you use the specified roll paper.
Roll paper reacts to heat and chemicals and changes color because it is heat sensitive. During
storage, keep it away from light, heat, volatile chemicals such as alcohol and thinner, UV light, and
polyvinyl chloride supplies and adhesive tape.
Paper dust building up in the printer can cause defective printing. Carefully remove it so that you do
not damage the parts by using a dry cotton swab, etc.
The speed of the printer varies depending on the operating environment and print content. The speed
may be reduced especially in extreme temperature environments or when the battery level is low.
When there is little roll paper remaining, red lines are displayed on both edges of the roll paper.
Replace it with a new one.
Cutting the roll paper
Cut the roll paper by pulling it toward you at an angle as shown below.
14
Operating Instructions - Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jt-c522gd series

Table of Contents