Diagnostic Utilities
Introduction
The ICONIA TAB A510 has a software tool designed to diagnose problems with its hardware
components.
Diagnostic Tool SOP
Preparation
•
Diagnostic Tool
•
USB Driver of A510 for PC
•
USB cable
•
MicroSD card
Tool Installation
Install the USB driver in a PC/NB.
1.
Connect the device to the PC/NB using a USB cable.
2.
Enable USB debugging on the device (Settings
3.
USB debugging).
On the PC/NB, unzip ACTP.zip.
4.
2-2
Figure 2:1. USB Debugging Mode
→
→
System
Developer options
→
Diagnostic Utilities