Electrical Safety; Package Contents - DeWalt DW872 Manual

English
• To support long pieces see Figure C3.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Residual Risks
The following risks are inherent to the use of saws:
• Injuries caused by touching the rotating parts
• Injuries caused by disruption of the cutting blade.
These risks are most evident:
• Withing the range of operation
• Within the range of the rotating machine parts
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of accidents caused by the uncovered parts of the rotating
saw blade.
• Risk of injury when changing the blade.
• Risk of squeezing fingers when opening the guards.

Electrical Safety

The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with IEC61029; therefore no earth wire is required.

WARNING: 220-240V units have to be operated via a fail-
safe isolating transformer with an earth screen between
the primary and secondary winding.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:
1 Toothed Chopsaw
1 Cutting blade
1 Hex key
1 Vertical clamp
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
8
Markings on Tool
The following pictograms are shown on the tool:
Date Code Position (Fig. A)
The date code
is printed into the housing.
Example:
Description (Fig. A)

On/off switch
1
Main handle
2
Carrying handle
3
Guard
4
Spindle lock
5
Material clamp
6
Fence
7
Mounting holes
8
Cutting table
9
Hex key
10
WALT
e
Intended Use
Your professional D
for the cutting of variously shaped metal materials: water and
gas pipes, angular iron, U-profiles, T-bars, rods, bolts, etc. Using
the appropriate cutting blade, it can cut hot and cold rolled
; the
2
carbon steel, construction steels according to DIN 1700 (ST33,
ST37–2, ST52–3), non-ferrous metals (i.e. aluminum, brass,
copper), stainless steel and synthetic materials (i.e. PVC). This
tool is not intended to be used in cast-iron, brick, tile or ceramic
materials. The tool is never to be used for cutting magnesium
work pieces
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These chopsaws are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
26 , which also includes the year of manufacture,
2018 XX XX
Year of Manufacture
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
WALT toothed chopsaw has been designed
e