Page 1
Do not use solvents over surfaces or structural tubes. or structural tubes. MODEL RTA - B005 MODEL RTA - B005 Thanks for purchasing one of our products, please read carefully the assembly Thanks for purchasing one of our products, please read carefully the assembly...
ó ó sobre esta un trapo seco. No utilice solventes, MODELO RTA-B005 MODELO RTA-B005 sobre las superficie ni las estructuras tubulares. Gracias por comprar uno de nuestros productos por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad.(Atencion: No adjuste firmemente los tornillos antes de tener la...
RTA-B005 PARTS LIST PARTS LIST LISTA DE PARTES Left Panel Right Panel Panel Izquierdo Panel derecho Casters Back Panel Ruedas Panel Posterior Left Front panel Mid Panel Panel Frontal Panel Medio IZQUIERDO DERECHO Right Left Bottom Panel Top Panel Lateral Structure...
Page 4
RTA-B005 SCREWS SCREWS TORNILLOS QTY. PART ITEM QTY. PART ITEM 3X15 MM 4X14MM 5X16 MM 4X20 MM 6X35 MM 5X17 MM 25X15MM 6X40 MM 6X12 MM 6X40MM BOLT INSTALLATION AS BELOW: 6x40mm INSTALE EL PERNO ASI: Bolt INCORRECT CORRECT Perno...
Page 5
RTA-B005 STEPS STEPS PASOS Insert Bolts (D) on the inside face of the Left Panel (1) and secure them with the screwdriver. Place the Back Panel (4), the Front Panel (5) and the Mid Panel (6) over the Bolts (D) and secure them tightening the connecting pieces in the Back Panel (4), the Front Panel (5) and the Mid Panel (6).
Page 6
RTA-B005 2PCS 2PCS Use screws A to assemble the casters (3) to the Back Side of the Bottom panel (7). Make sure the 2 locking casters are facing to the front. Con tornillos A fije las Ruedas (3) a la cara posterior del Panel Inferior (7).
Page 7
RTA-B005 SCREWS SCREWS TORNILLOS TORNILLOS 3X15 MM 2PCS 6X40 MM 6PCS Insert Bolts (D) on the inside face of the Top Panel (8) and secure them with the screwdriver. Use Screws (F) to fix the Magnetic Catch (17A) to the inside face of Top Panel (8). Then insert the Bolts into the holes of the Back, Left and Right Panels (4,1,2).
Page 8
RTA-B005 Right DERECHO Left IZQUIERDO SCREWS SCREWS TORNILLOS TORNILLOS 25X15MM 2PCS Place the Washers (I) between the Left Tilting Mechanism Assemble the Plastic Cover (11) to (13) and the Top Structure (10) as shown in the drawing, the Lateral Structure (9).
Page 9
RTA-B005 Slide the Top Structures (10) into the Plastic Covers (11). Screw in the Knobs (16) into the Plastic Covers (11). Use Screws (B) to fix the Protection Rail (15) to the Main Panel (12). Inserte y Ajuste los Tornillos de Ajuste en Las piezas Plasticas (11).
Page 10
RTA-B005 P.10 SCREWS SCREWS TORNILLOS TORNILLOS 4X20 MM Use Screw (G) to fix the Handle (19) to the Drawer Panel (18). Use los tornillos (G) para fijar la manija (19) al panel de gaveta (18). SCREWS SCREWS TORNILLOS TORNILLOS 3X15 MM...
"Defects" as used in this warranty, is de ned as any imperfections that impair the use of the furniture or product. RTA products will repair or replace, at is option, without charge to the original purchaser ‘other than freight from purchaser to RTA Products, only the defective products or parts for a...
Need help?
Do you have a question about the B005 and is the answer not in the manual?
Questions and answers