Module, System And Sub-System Configuration Files; Frame And System Presets - Lake LM Series Quick Start Manual

5. Signal Flow and LAKE Processing

5.7.1. Module, System and Sub-System Configuration Files

Module, System and Sub-System Configuration files are stored on the LAKE Controller PC, and data is passed
across the network when recalling or storing these type of files.
• A Module file is the smallest set of data that can be stored and recalled; it contains crossover, gain, delay, and
limiter information for an individual loudspeaker (i.e. the data shown in red in the signal flow diagrams in
section 5.1). A Module file may be recalled into other LAKE devices. It is not possible to store a Module File
directly on the hardware device.
• A System or Sub-System Configuration File contains a set of Module file information in addition to Frame
related information such Group data and I/O configuration (i.e. the data shown in blue in the signal flow
diagrams in section 5.1).

5.7.2. Frame and System Presets

This device allows the complete processor configuration to be stored as a Frame Preset on the hardware unit itself.
Presets can be recalled via the front panel (please refer to section 6.9.6) or via the LAKE Controller software (please
refer to the LAKE Controller Operation Manual). Presets can be stored into the device using the LAKE Controller or
the LM Series Preset Manager utility.
A maximum of 100 Frame Presets can be stored on this device. The data within a Frame Preset includes the
configurations of both Modules in the Frame, including all levels, crossover, EQ, input mixer, output routing, and
all other Module, Frame and Group parameters. As Frame Presets are stored in the device, complete processor
configurations may be recalled without the need to connect the device to a PC.
Using the System Presets function in the LAKE Controller, entire system configurations can be stored and
recalled across a network of LM & PLM Series devices. This enables fast retrieval and switching of entire system
configurations as minimal data is being sent between the Controller and Processors.
18
LM SERIES Quick Start Guide rev 1.3.6