Tire Change Calibration - Toyota OM30875U Manual

4. Touch either or
direction of the current vehicle position
mark.
5. Touch "Enter".
The map screen will be displayed.

TIRE CHANGE CALIBRATION

The tire change calibration function will be
used when replacing the tires. This func-
tion will adjust the miscalculation caused
by the circumference difference between
the old and new tires. If this procedure is
not performed when the tires are replaced,
the current vehicle position mark may be
incorrectly displayed.
to adjust the
To perform a distance calibration pro-
cedure, touch "Tire Change" on the
"Calibration" screen.
The message appears and the quick dis-
tance calibration is automatically started.
A few seconds later, a map screen will be
displayed.
ADVANCED FUNCTIONS
113