Cleaning And Maintenance - Kalorik EBS 40398 Manual

ERROR INDICATION
• If the display shows symbols randomly or if the scale doesn't turn
off automatically, it means that your scale has a problem
(wrong initialization or weighing error).
• Step off the scale and wait for it to turn off.
• You can start again.
• If the problem goes on, remove the batteries for 10 seconds,
and then put them back in place.
OVERLOADING INDICATOR
If the
maximum weight or measurement range accepted by your scale is
exceeded, please step off in order not to damage your scale.
LOW BATTERY INDICATOR
If the
batteries of your scale should be replaced (see paragraph "Before the
first use").
BATTERY
If your appliance does not work properly, it is probably because the
batteries are discharged. In that case, replace them by new ones of
the same type (see paragraph "Before the first use"). Please dispose of
the old batteries in an environmentally friendly way.

CLEANING AND MAINTENANCE

• The surface of the scale might be slippery when wet. Keep it and
your feet dry!
• Be careful when manipulating the scale because it is a precision
device.
• Clean the outside parts only with a lightly damp cloth. Never use
abrasive products to clean your scale.
• NEVER USE THIS APPLIANCE NEAR WATER; NEVER IMMERSE IT IN
WATER OR ANY LIQUID WHATSOEVER.
www.KALORIK.com
symbol appears on the LCD screen, it means that the
symbol is displayed on the LCD screen, it means that the
15
EBS 40398 - 200605