Advertisement
When using electrical appliances, basic safety precautions should always be followed, including the following:
Please read these instructions carefully before using the appliance.
People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance.
Close supervision is necessary to prevent children from using the appliance as a toy.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
NOT SUITABLE FOR TRADE
This appliance works with 1 lithium battery (3 V, type CR2032, included). If battery is not pre-installed, remove the lid of the battery housing on the rear part of the scale. Place the battery, the positive pole facing outwards, and then put back the lid. You can now use your scale
Your scale allows you to use the metric measurement system (grams) OR the imperial system (pounds, ounces). Choose the measurement system at any time by pressing the "Unit" touch button (lb: oz...g), depending on the measurement system you wish to use. This button is situated on the glass platform. The scale uses the following sequence:
lb: oz => Oz => ml (for water only) => g => lb: oz...
Put the scale on an even and hard surface, for instance a table or countertop. Avoid soft surfaces.
The zero/tare function is extremely useful to calculate the weight of ingredients that cannot be put directly on the platform. For example, flour, or liquids, which require a container before weighing.
In order to use this function, place the empty container or object on the scale, and then press the "On/Tare" touch button near the LCD display. The scale will switch on and indicate 0g or 0:0.0 lb: oz.
In case that the scale was already switched on, simply press "On/Tare" with the object or empty container on it, so that the display will show "0" or "0:0.0". The "TARE" symbol is displayed.
Add the ingredient to weigh. The weight indicated on the display is only the weight of the ingredient added inside the container!
Note: When you remove the container from the platform, the LCD display will show the weight as negative (" – " will appear on the lefthand side). To reset, simply press "On/Tare" again.
If the "EEEE" symbol appears on the LCD screen, it means that the maximum weight accepted by your scale is exceeded. Please remove the object from the platform in order not to damage your scale.
If the "LO" symbol is displayed on the LCD screen, it means that the battery of your scale is low in voltage (less than 2.5V), and should be replaced soon. Please dispose of the old batteries in an environmentally friendly way. An advance warning indicator is also supplied, when the symbol is displayed (if battery voltage is lower than 2.6V).
If the "unSt" symbol is displayed on the LCD screen, it means that the weight on the scale is not stabilized, or that the scale is not placed on a hard, level and flat surface. Place the scale on a flat stable surface and try again.
If the display shows symbols randomly or if the scale doesn't turn off automatically, it means that your scale has a problem (wrong initialization or weighing error).
Remove any object from the scale and wait for it to turn off. Then start again. If the problem persists, remove the battery for 10 seconds, and then put it back in place.
If your appliance does not work properly, it is probably because the battery is discharged. In that case, replace it by a new one of the same type (see paragraph "Before the first use"). Please dispose of the old batteries in an environmentally friendly way.
In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the implication of both suppliers and users. For this reason, as indicated by the symbol on the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user should bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directives.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the EKS 42428 that isn't answered in the manual? Leave your question here.