Connections - Wadia 302 Owner's Manual

Connections ____________________

This section provides instructions to connect the Wadia 3 3 3 3 02 CD Player
to the rest of your music system. Below is an illustration of the Wadia
3 3 3 3 02 CD Player rear panel, showing all inputs and outputs.
Digital inputs (Optional)
IR pass through
(page 14)
(page 14)
IN 1 IN 2 IN 3 IN 4
RIGHT ANALOG OUTPUT LEFT
IR IN
R L
IR OUT
DIGITAL OUTPUT
Analog outputs Digital output
(page 10) (page 14)
Avoid allowing static shocks to be applied to the inputs or outputs. To
prevent static shocks, touch any grounded surface, such as the chassis
of a component that is plugged into an AC socket, before connecting
or removing a cable. It is unlikely that a static shock will damage the
unit, but it may cause the Wadia 3 3 3 3 02 CD Player circuitry to lock-up (see
Trouble Shooting in Appendices).
Inputs and outputs can be safely connected to the Wadia 3 3 3 3 02 CD
Player:
When the AC power is switched off OR
•
• When the unit is in Relay-Mute mode (See Mute in Operation)
AC inlet and power switch
(page 9)
DESIGNED & MANUFACTURED
IN THE U.S.A.
Maximum Output Level Adjustment
(page 13)
9