Chapter 2 Hardware Settings; Overview; Figure 3 Jumper Connector - Quanmax ECX-BW00 User Manual

Chapter 2
Chapter 2
Hardware Settings
 Overview
This chapter provides the definitions and locations of jumpers, headers, and
connectors.
Jumpers
The product has several jumpers which must be properly configured to ensure
correct operation.

Figure 3 Jumper Connector

For a three-pin jumper (see Figure 3), the jumper setting is designated "1-2" when
the jumper connects pins 1 and 2. The jumper setting is designated "2-3" when pins
2 and 3 are connected and so on. You will see that one of the lines surrounding a
jumper pin is thick, which indicates pin No.1.
To move a jumper from one position to another, use needle-nose pliers or tweezers
to pull the pin cap off the pins and move it to the desired position.
ECX-BW00 User's Manual
20