Open Air Cinema CINEBOX HOME SYSTEM User Manual page 14

14
STEP 4: POWER ON MEDIA PLAYER
Power on the Blu-ray, DVD, or Playstation gaming system. The
audio mixer should power on automatically when the main power is
plugged in.
ATTENTION: The audio mixer power light will illuminate when
powered on. It is possible for an audio signal to pass through the
mixer when it is off, but the signal will be very weak. Make certain the
audio mixer is powered on for proper audio levels.
STEP 5: POWER ON SPEAKERS AND AUDIO VOLUME
Return to speakers and turn them on. Next, slowly increase the
speaker level (volume) to 50% so the line on the volume knob is
pointing directly up.
Audio should not be heard at this point. The volume is now
adjustable through the audio mixer in the CineBox console.
STEP 6: PEFORM SOUND CHECK
Slowly increase the volume knob labeled "Level 1" until the volume
from the speakers reaches the desired level. Make sure the
Playstation player is playing content with audio.
You may also use a wired microphone or MP3 player (plugged into
one of the other available audio mixer channels) to test the audio
levels.
CINEBOX™ CONSOLE SETUP