Compact Disc Playback - THOMSON RCD400BT Operating Instructions Manual

5 . At FM, press FM ST. / MONO button to select
stereo sound.The FM stereo indicator (St) will
appear on the LCD display panel when an
FM Stereo Broadcast is received. When FM
signal is weak and sound distortion occurs,
it is better to select mono sound.
MONO/ STEREO
FOR BETTER RECEPTION
FM
RADIO MEMORY FUNCTION
Maximum 20 preset stations can be memorized in FM
1. Press the " F-SKIP/UP or F-SKIP/UP or
select the desired frequency.
2. Press the " PROGRAM/REPEAT /CLOCK-ADJ. " button to enter tuning
saving mode.
3. Press the " MEMORY UP "OR " MEMORY DN " ( on remote ) to select the
desired programmed number.
4. Press the " PROGRAM/REPEAT /CLOCK-ADJ. " button again to confirm
the selection.

COMPACT DISC PLAYBACK

1 . Turn on the unit by
pressing the POWER button.
2 . Press the FUNCTION button to
select CD. The symbol " _ _ _ " flashes
for searching CD disc.
LCD display
FUNCTION
6.
VOLUME
AFTER LISTENING
Turn off the unit by pressing POWER button.
B-SKIP/DOWN " button to B-SKIP/DOWN " button to " button to
3 . Open the CD door by pushing Open / Close CD
POWER
4. Insert a disc with the label side facing up.
5 . Close the CD door.
Adjust the sound.
LCD display
PROGRAM
LCD display
button.
The disc will rotate and
the total tracks of the disc
will show on the display.
VOLUME
6 GB