Ipod Operations; Selecting A Track From The Menu - JVC KW-TC801 Instructions Manual

iPod operations

This unit is ready for operating an Apple iPod
from the control panel.
Before operating your iPod, connect a JVC
interface adapter — KS-PD100 for Apple
iPod (separately purchased) to the CD changer
jack on the rear of this unit. See also "iPod
operations" on page 20.
• You cannot use the CD changer when
connecting your iPod to this unit.
• For details, refer also to the manual supplied
for the interface adapter.
~
Ÿ
Playback starts automatically from
where it has been paused previously.
!
Adjust the volume.
⁄
Adjust the sound as you want.
(See page 14.)
To pause playback
To resume playback, turn the dial one step to
the right again.
To fast-forward or reverse the track
To go to the next or previous tracks

Selecting a track from the menu

1
Enter the main menu.
Turn the dial one step to
the left. "MENU" appears
on the display.
Now the TUNE/FOLDER dial and the
4 ¢ buttons work as the
/
menu selecting buttons*.
* The menu selecting mode will be
canceled:
– If no operations are done for about 5
seconds.
– When you start playing a track.
Continued on the next page
Turn the dial one step to
the right.
15