Advertisement
Keep warm mode:
•
In standby status, press and hold the start button for 3 seconds to enter keep warm
mode and begin heating water. The default pre-set temperature is 50°C. Press the
start button again for one second and the kettle will return to its standby status.
•
Once in keep warm mode, press the appropriate preset button for the desired
temperature, and the corresponding indicator light will illuminate. Press the start
button within 3 seconds of setting the temperature, and the kettle will enter keep
warm mode and begin heating. The corresponding indicator light will flash at an
interval of 0.5 seconds.
•
If the start button is not pressed within 3 seconds of setting the temperature, the
indicator light will dim after 15 seconds and the kettle will return to standby status.
•
In keep warm mode, the kettle will sound the alert twice when the water reaches
the preset temperature. The kettle will not sound the alert tone again during this
keep warm cycle.
•
After reaching the preset temperature, the kettle will enter the keep warm cycle for
30 minutes. When the water temperature reaches below the preset temperature,
the kettle will start heating automatically. After 30 minutes the kettle returns to
standby status.
•
In keep warm mode, only the corresponding pre-set temperature indicator light will
flash; the others lights will be dimmed until the keep warm cycle has ended. During
the keep warm process, pressing the preset temperature button has no effect.
•
The keep warm temperature range is -1/+3°C.
6. Malfunction:
•
When the kettle experiences a short circuit, all the temperature indicator lights will
flash, the kettle will stop heating and the buttons cannot be operated.
•
When the kettle has an open circuit, all the temperature indicator lights turn off, the
kettle stops heating and the buttons cannot be operated.
Advertisement
