Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Optocore YG2
Summary of Contents for Optocore YG2
- Page 1 Operating Manual for OPTOCORE YG2/YS2 OPTICAL DIGITAL miniYGDAI cards for YAMAHA DEVICES Optical Network I/O Cards © Copyright 2020 All rights reserved OPTOCORE GmbH Alte Allee 28 81245 Munich Germany YG2 / YS2 – miniYGDAI card for Yamaha Operating Manual Rev. 2.3...
- Page 2 Page intentionally left blank.
-
Page 3: Important Safety Instructions
Never switch on power amplifiers before the complete system is stable and the level meters of • the OPTOCORE CONTROL software indicate a normal level. The card may only be used in accordance to the information provided in this operating •... - Page 4 F; ensure proper ventilation ° ° ° ° Storage temperature: -20 C …60 C ≡ -4 F … 140 Power Supply • The console in which the card is mounted provides power supply and grounding. YG2 / YS2 4 / 21 Rev. 2.3...
- Page 5 Do not attempt to service this device yourself. The device contains no user serviceable parts, components or controls. The device may not be serviced, altered or modified without authorisation from Optocore or an Optocore authorised distributor / dealer. Only qualified service personnel may carry out repair and maintenance work on the device.
-
Page 6: Ce/Fcc-Conformity
CE/FCC-Conformity This document confirms that the product YG2/YS2 bearing the CE (Communauté Européenne) label meets all requirements in the EMC directive 2004/108/EG laid down by the Member States Council for adjustment of legal requirements. Furthermore the product complies with the rules and regulations of the low-voltage directive 2006/95/EG and the Restriction of Hazardous Substances Recast Directive 2011/65/EU (RoHS 2). -
Page 7: Table Of Contents
YG2 / YS2 Optical Digital Mini - YGDAI Cards for Yamaha Devices Table of Contents Important Safety Instructions ............................. 3 CE/FCC-Conformity ..............................6 Device Description ..............................8 Front Panel YG2 ................................ 9 YG2 Cards Details ..............................10 Digital Audio ..............................10 LC-Connectors ............................. -
Page 8: Device Description
RJ45 “SUB” port, the YS2 cards increase the number of audio channels available at the Yamaha device up to 64IN / 64OUT (32IN / 32OUT @ 96kHz) per YG2 card. Each YS2 card also exchanges a maximum of 16IN / 16OUT audio channels according to the Yamaha Mini - YGDAI standard with the device. -
Page 9: Front Panel Yg2
USB port for remote control via PC 2 x RS422 ports e.g. for Yamaha HA Remote protocol exchange with console Use the TRI-Y cable, provided with the YG2 card. See chapter “Connection Tables” for detailed pin out. For updating via PC a standard RS232 cable is sufficient. -
Page 10: Yg2 Cards Details
YG2 Cards Details Digital Audio The YG2 digital audio interface is located on the console slot connector. According to the Yamaha Mini - YGDAI standard, the YG2 card features a maximum of 16IN / 16OUT audio channels. Using the OPTOCORE CONTROL software the card can be switch to 8 channel mode for Yamaha devices providing 8IN / 8OUT audio channels, such as the DIO8. -
Page 11: Front Panel Ys2
SUB port: RJ45 port for connection towards the MAIN port of YS2 card with CAT5 cable MAIN port: RJ45 port for connection towards the SUB port of a YG2 or YS2 card with CAT5 cable YG2 / YS2 11 / 21... -
Page 12: Ys2 Cards Details
MAIN Port The MAIN port is connected to the SUB port of an YG2 card. In a chain of several YS2 cards it is connected to the SUB port of the next YS2 card towards direction of the YG2 card. -
Page 13: Starting Up
Hardware Connection To get the YG2 / YS2 card system going, please be sure that the main power of the console is turned off before inserting the cards into the Mini - YGDAI slots. Please refer to your consoles manual for detailed information. -
Page 14: Connectors And Cables
> 40 dB between 30 MHz up to 1 GHz. The shield of the cable should have contact to the connector hood. USB-Connection The D-SUB9 connector also provides an USB port. Use the TRI-Y cable, which is provided with every YG2/YS2 card. LAN-Connection Use a standard twisted pair cable (Cat-5, Cat-6) with RJ-45 connectors. -
Page 15: Network Example
Network Example Fig. 1: Wiring of a system with DD32R, X6R-converter units and a Yamaha console with YG2/YS2 cards. In order to control the X6R-converter at the console the Yamaha Emulation Mode (YEM) must be activated in OPTOCORE CONTROL. Yamaha preamps connected to the DD32R will use the fiber optical connection only for the bi-directional transfer of RS485 data and no special mode is activated. -
Page 16: Device Compatibility
The table below lists Yamaha consoles and devices by the number of IN / OUT audio channels supported on one console slot. Set the YG2 / YS2 cards either to “MY-16AT emulation” or “MY-8AT emulation” according to the number of channels supported. -
Page 17: Connection Tables
The TRI-Y cable combines the two RS422 and the USB-Port for PC connection in one D-Sub-9 connector. It is used to establish the connection from the YG2-Card to a PC USB interface and remote interface of a console. YG2 Auxiliary Port 2 x RS422 and USB port... -
Page 18: Technical Specifications
Convention EIA / TIA - 232 Data channels Digital control data R x D, T x D Data rate 57 600 Baud SUB Port Convention Optocore 64 channel CAT5 Cable Type ANSI/TIA/EIA-568-A, TSB-95 CAT5 Max. Cable length 10 m / 33 feet USB Port Remote control connection USB 1.1 full speed... -
Page 19: Dimensions And Weight
Dimensions and Weight Cards Dimensions YG2 / YS2 Card H x B x T: 100 x 160 x 40 [mm] H x W x D: 3.94 x 6.3 x 1.57 [inch] Cards Weight YG2 Card Weight: 365 g / 12.88 ounces YS2 Card Weight: 175 g / 6.17 ounces... -
Page 20: Warranty
The warranty will be void if you tamper with internal components. Please address any questions or inquiries to OPTOCORE or your distributor/dealer. For a full warranty conditions refer to the Warranty Card attached to every Optocore device with a first shipment. How to Obtain Warranty Service When discovering a problem with an OPTOCORE device, you should contact either Optocore directly or a dealer/distributor to determine and confirm a hardware fault. -
Page 21: Shipping Contents
Shipping Contents YG2 Card The standard shipment of an YG2 cards contains the following: 1 x YG2 Yamaha Mini - YGDAI card 1 x TRI-Y Cable 1 x Optical patch cable, length 2 m / 6.5ft, LC to SC type connectors, fiber 50µm (multi-mode)