Technical Data; General Safety Warnings For Compressed Air Tools - Parkside PDBNP 14 B1 Translation Of The Original Instructions

Technical data

Working pressure
Air consumption
Stroke length
Traction
Compressed air supply
Noise emission value
Noise measurement determined in accordance
with ISO 15744. The rated noise level of the tool is
typically:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Total vibration value
Vibration values determined in accordance with
ISO 28927-6 and EN 12096:
Vibration emission value
Uncertainty
NOTE
► The noise emission levels and vibration values
specified in these instructions have been
measured in accordance with the corre-
sponding standardised measuring procedure
and can be used to make equipment compar-
isons. The noise emission levels and vibration
values vary depending on the use of the
compressed air tool and may be higher than
the values specified in these instructions in
some cases. It is easy to underestimate the
noise emission levels and vibration values if
the compressed air tool is used regularly in
this manner.
PDBNP 14 B1
max. 6.3 bar
127 l/min (average)
17 mm
min. 7,050 N
1/4"
L = 75.8 dB (A)
pA
K = 3 dB
pA
L
= 86.8 dB (A)
WA
K = 3 dB
WA
a ≤ 0.85 m/s 2
h
K = 0.59 m/s 2
h
WARNING! General safety
warnings for
compressed air tools
WARNING!
► For multiple hazards: Please ensure that you
have read and understood the safety informa-
tion before setting up, operating, repairing,
maintaining and replacing accessories on the
machine and before working in the vicinity of
the machine for threadless fasteners. Failure
to do this can result in serious bodily injury.
■ The machine should only be set up, adjusted
or used by suitably qualified and trained
operators.
■ This machine for threadless fasteners may not
be modified in any way. Modifications can
reduce the effectiveness of the safety measures
and increase the risks for the operator.
■ The safety instructions should not be lost – give
them to the operator.
■ Never use damaged machines for threadless
fasteners.
■ The appliance must be inspected regularly to
ensure that it is labelled with the required rated
values and markings given in this manual. The
user must contact the manufacturer to obtain
replacement labels if necessary.
GB │ IE │
15 ■