General Safety Rules; Electrical Safety; Personal Safety - Chicago Electric 93765 Set Up And Operating Instructions Manual

Video inspection system
Table of Contents

Advertisement

Brought to You by www.snapwhole.com

gENEral SaFETY rulES

WarNINg!
rEaD aND uNDErSTaND all
INSTruCTIONS
Failure to follow all instructions listed
below may result in
electric shock, fire, and/or serious
injury.
SaVE ThESE INSTruCTIONS
WOrK arEa
1.
Keep work area clean and well lit.
Cluttered benches and dark areas
invite accidents.
2.
Do not operate in explosive
atmospheres, such as in the
presence of flammable liquids, gases,
or dust. Powered products create
sparks which may ignite the dust or
fumes.

ElECTrICal SaFETY

1.
grounded devices must be
plugged into an outlet properly
installed and grounded in
accordance with all codes and
ordinances. Never modify the
plug in any way. Do not use any
adapter plugs. Check with a
qualified electrician if you are in
doubt as to whether the outlet is
properly grounded. If the devices
should electrically malfunction or
break down, grounding provides a
low resistance path to carry electricity
away from the user
2.
Do not expose to rain or wet
conditions. Water entering a device
will increase the risk of electric shock.
SKU 93765
For technical questions, please call 1-800-444-3353.

PErSONal SaFETY

1.
Stay alert. Watch what you are
doing, and use common sense
when operating a device. Do not
use a device while tired or under
the influence of drugs, alcohol, or
medication. A moment of inattention
while operating devices may result in
serious personal injury.
2.
Dress properly. Do not wear loose
clothing or jewelry. Contain long
hair. Keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
3.
Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enables
better control of the device in
unexpected situations.
4.
Wear aNSI-approved safety impact
goggles when using this product.
Dust mask, non-skid safety shoes,
and a hard hat must be used for
appropriate conditions.
DEVICE uSE aND CarE
1.
use the correct device for your
application. The correct device will
do the job better and safer at the rate
for which it is designed.
2.
Do not use this product if the
Power Switch does not turn it on
or off. Any product that cannot be
controlled with the Power Switch is
dangerous and must be replaced.
3.
Turn off the Power Switch and
disconnect the Power adapter
from the electrical outlet before
making any adjustments, changing
Page 3

Advertisement

Table of Contents
loading

Table of Contents